Support(24/7): email:commercial@morgenbd.com; Phone: +880 55168049, +880 16132003001

Fire Pumps & Control Panel

Horizontal split case fire pump

  • Certificate: UL Listed/ FM Approved
  • Standard: NFPA20
  • Diesel drive: Clarke engine (UL+FM)/ NM
  • Motor drive: WEG/ Top (UL)
  • Controller: Firetrol/ Tornatech/ Eaton (UL+FM)
  • Flow: 500 to 5000 gpm
  • Head: 40 to 422 PSI
  • Ref. No.: U01

End suction fire pump

  • Certificate: UL Listed/ FM Approved
  • Standard: NFPA20
  • Diesel drive: Clarke engine (UL+FM)/ NM
  • Motor drive: WEG/ Top (UL)
  • Controller: Firetrol/ Tornatech/ Eaton (UL+FM)
  • Flow: 150 to 750 gpm
  • Head: 40 to 151 psi
  • Ref. No.: U02
end_suction_pump

Vertical in-line fire pump

  • Certificate: UL Listed/ FM Approved
  • Standard: NFPA20
  • Motor drive: WEG/ Top (UL)
  • Controller: Firetrol/ Tornatech/ Eaton (UL+FM)
  • Flow: 150 to 1000 gpm
  • Head: 40 to 150 psi
  • Ref. No.: U03

Vertical turbine fire pump

  • Certificate: UL Listed/ FM Approved
  • Standard: NFPA20
  • Diesel drive: Clarke engine (UL+FM)/ NM
  • Motor drive: WEG/ Top (UL)
  • Controller: Firetrol/ Tornatech/ Eaton (UL+FM)
  • Flow: 500 to 5000 gpm
  • Head: 43 to 403 psi
  • Ref. No.: U04

JOCKEY PUMP

  • Certificate: CE
  • Standard: NFPA20
  • Motor: DC, 50Hz, with IP55 protection
  • Controller: Firetrol/ Tornatech/ Eaton (UL+FM)
  • Temperature: Medium, -20°C to 140°C
  • Flow: 1 to 154 gpm
  • Head: Max 360 psi
  • Disel Engine
  • Two Way Pillar Hydrant
  • Base inlet: Flange as EN1092-2, DN100, PN16
  • Test: Factory hydro test 30 bar
  • Temperature: 4°C to 70°C
  • Surface: FBE coating as AWWA C550
DIESEL ENGINE

Riser Valves & Accessories

OS&Y Gate Valve (Flanged, Grooved etc)

  • Certificate: UL Listed/ FM Approved
  • Standard: BS 5163 UL 262/ AWWA C515
  • Connection: Flanged as BS EN 1092-2 + Grooved as ISO 6182/ Flanged as ASME B16.1 + Grooved as AWWA C606
  • Temperature: 0°C to 100°C
  • W. pressure: PN 16/ 300 psi (2.07 Mpa)
  • Surface: FBE coating as AWWA C550
Flanged-Grooved-OSY-gate-valve

Swing Check /Non-Return Valve

  • Certificate: UL Listed/ FM Approved
  • Standard: EN 1074-3 UL 312/ AWWA C508
  • Connection: Flanged as BS EN 1092-2/ Flanged as ASME B16.1
  • Temperature: 0°C to 100°C
  • W. pressure: PN 16/ 300 psi (2.07 Mpa )
  • Surface: FBE coating as AWWA C550

Butterfly valve with Supervisory Option

  • Certificate: UL Listed/ FM Approved
  • Standard: EN 593/ BS 5155 UL 1091/ MSS SP-67
  • Top flanged: ISO 5211
  • Indicator: Flag type position indicator
  • Temperature: 0°C to 100°C
  • W. pressure: PN 16/ 300 psi (2.07 MPa)
  • Surface: FBE coating as AWWA C550
Wafer-butterfly-valve

Y-STRAINER

  • Certificate: UL Listed
  • Standard: UL Subject 321
  • Screen: Standard perforation
  • Seat: Recessed seat for screen alignment
  • Connection: Flanged as EN 1092-2/ Flanged as ANSI B16.1
  • Temperature: 0°C to 100°C
  • W. pressure: PN 16/ 300 psi
  • Surface: FBE coating as AWWA C550
03-Y-Stainer

PRESSURE REDUCING VALVE

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 1468
  • Connection: Flanged as ANSI B16.42
  • Pres. adjustment: 30 ~ 300 psi.
  • Pres. differential: Min 10 psi
  • Temperature: Water, max 82°C
  • W. pressure: Class 150/ class 300
  • Surface: FBE coating as AWWA C550
05-pressure-reducing-valve

Alarm Check Valve Assembly

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 193
  • Connection: Flanged as ANSI B16.1/ EN 1092-2
  • Installation: Vertical
  • Test: Factory hydro test 350 psi (2.4 MPa)
  • Temperature: 4°C to 70°C
  • W. pressure: 175/ 300 psi (1.21/ 2.07 MPa)
  • Surface: FBE coating as AWWA C550

Deluge valve

  • Certificate: UL Listed
  • Standard: ANSI/ UL 193
  • Connection: Flanged as ANSI B16.1/ EN 1092-2
  • Installation: Horizontal/ Vertical
  • Test: Factory hydro test 350 psi (2.4 MPa)
  • Temperature: 0°C to 68°C
  • W. pressure: 300 psi (2.07 MPa)
  • Surface: FBE coating as AWWA C550

Alarm Check Valve Assembly

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 193
  • Connection: Flanged as ANSI B16.1/ EN 1092-2
  • Installation: Vertical
  • Test: Factory hydro test 350 psi (2.4 MPa)
  • Temperature: 4°C to 70°C
  • W. pressure: 175/ 300 psi (1.21/ 2.07 MPa)
  • Surface: FBE coating as AWWA C550

AIR RELEASE VALVE

  • Certificate: UL Listed / FM Approved
  • Standard: UL 2573, NFPA 20, AWWA C512
  • Connection: Threaded, NPT / BSPT / BSPP
  • Feature: Small orifice, vent air only
  • Temperature: Max 82°C, water
  • W. pressure: 300 / 200 psi
  • Surface: FBE coating as AWWA C550
09-Air Vent Valve

PRESSURE RELIEF VALVE

  • Certificate: UL Listed / FM Approved
  • Standard: UL 1478, NFPA 20
  • Connection: Flanged as B16.42 Class 150 / 300
  • Adjustment: 20 ~ 200 / 100 ~ 300 psi, etc.
  • Temperature: Max 82°C, water
  • W. pressure: 250 / 400 psi, etc.
  • Surface: FBE coating as AWWA C550
08-Pressure Relief Valve

TEST AND DRAIN VALVE

  • Certificate: UL Listed/ FM Approved
  • Standard: UL Subject 258
  • Connection: Female thread, NPT or BSPT/ grooved
  • Hydro test: 350 psi
  • Temperature: 0°C to 100°C
  • W. pressure: 175 psi
  • Surface: Rough brass
10-Test-and-drain-valve

RUBBER EXPANSION JOINT

  • Certificate: CE
  • Standard: EJMA
  • Connection: ANSI B16.1 Class 125, EN 1092-2 PN16
  • Temperature: -10°C to 120°C
  • W. pressure: 230 psi
  • Surface: Black rubber, with galv. flanges
11-Flexible Rubber Joint

SUPERVISORY/ TAMPER SWITCH

  • Certificate: UL Listed/ FM Approved/ CE
  • Cover: Die-casting aluminium as ASTM B85
  • Connection plate: Mild steel/ SS
  • Trip rod: SS304/ SS316
  • Temperature: -40°C to 60°C
  • Surface: Corrosion resistant coating
  • Enclosure: IP 65 and IP 67
12-Supervisory-Switch

WATERFLOW SWITCH

  • Certificate: UL Listed / FM Approved
  • Standard: UL 346, comply to NFPA 13, 13D, 13R, 72
  • Trigger threshold: Flow rate 4 ~ 10 GPM
  • Max surge: 18 FPS (Feet per second)
  • Retard time: 0-90 second delay, field replaceable
  • Temperature: 0°C to 49°C
  • Pressure rating: 250 / 450 / 300 psi
  • Surface: FBE coating as AWWA C550
13-Waterflow-detector-Flow-switch

Sprinkler & Accessories

Pendent Sprinkler (Standard Response)

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 199
  • K factor: K 5.6, K 8.0
  • Response: Standard with 5 mm glass bulb
  • Escutcheon: Recessed escutcheon
  • Thread: NPT/ BSPT
  • W. pressure: 175 psi (1.21 MPa)
  • Finish: Rough brass/ chrome plated/ white

Pendent Sprinkler (Quick Response)

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 199
  • K factor: K 5.6, K 8.0
  • Response: Standard with 3 mm glass bulb
  • Escutcheon: Recessed escutcheon
  • Thread: NPT/ BSPT
  • W. pressure: 175 psi (1.21 MPa)
  • Finish: Rough brass/ chrome plated/ white

UPRIGHT SPRINKLER (STANDARD RESPONSE)

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 199
  • K factor: K 5.6, K 8.0
  • Response: Standard with 5 mm glass bulb
  • Escutcheon: Recessed escutcheon
  • Thread: NPT/ BSPT
  • W. pressure: 175 psi (1.21 MPa)
  • Finish: Rough brass/ chrome plated/ white

UPRIGHT SPRINKLER (QUICK RESPONSE)

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 199
  • K factor: K 5.6, K 8.0
  • Response: Standard with 3 mm glass bulb
  • Escutcheon: Recessed escutcheon
  • Thread: NPT/ BSPT
  • W. pressure: 175 psi (1.21 MPa)
  • Finish: Rough brass/ chrome plated/ white

HORIZONTAL SIDEWALL SPRINKLER

  • Certificate: UL Listed / FM Approved
  • Standard: UL 199, NFPA 13
  • Feature: K5.6 (K80), SR, HSW
  • W. pressure: 250 / 175 psi
  • T. pressure: 500 psi, factory hydrostatic test
  • O. pressure: Min 7 psi
  • Surface: Rough brass / chrome plated / white painted, etc.
05-sidewall-sprinkler-

ESFR PENDENT SPRINKLER

  • Certificate: UL Listed / FM Approved
  • Standard: UL 199, NFPA 13
  • Feature: K16.8 (K242), ESFR, pendent
  • W. pressure: 175 psi
  • T. pressure: 500 psi, factory hydrostatic test
  • O. pressure: Refer to NFPA 13 / FM spec.
  • Surface: Rough brass / white paint
06-K16.8-ESFR-pendent-sprinkler

CMDA UPRIGHT SPRINKLER

  • Certificate: UL Listed / FM Approved
  • Standard: UL 199, NFPA 13
  • Feature: K16.8 (K242), CMDA, SR, upright
  • W. pressure: 175 psi
  • T. pressure: 500 psi, factory hydrostatic test
  • O. pressure: Min 7 psi
  • Surface: Rough brass / chrome plated / white painted, etc.
07-K16.8-CMDA-standard-response-upright-sprinkler

FOAM WATER SPRINKLER

  • Certificate: UL Listed / FM Approved
  • Standard: UL 162, NFPA 13 / 16
  • Feature: K2.9, pendent
  • W. pressure: 175 psi
  • Inlet pressure: Min 30 psi
  • Surface: Bronze / natural SS
08-Foam-water-sprinkler-L1

SPRINKLER ESCUTCHEON

  • Certificate: UL Listed/ FM Approved
  • Thread: NPT/ BSPT
  • Type: One-piece/ two-pieces
  • Closure: Carbon steel/ SS (two-piece)
  • Mounting plate: Carbon steel/ SS
  • Finish: Chrome plated/ white painting/ Brass
09-Sprinkler-escutcheon

SPRINKLER GUARD AND SHIELD

  • Certificate: UL Listed / FM Approved
  • Standard: UL 199, NFPA 13
  • Material: Carbon steel
  • Surface: Chromed plated / red paint
10-Sprinkler-guard-and-shield-1

Fire Hydrant System & Hose Accessories

Aluminum Plug W/Chain

  • Aluminum plugs are made from rugged extruded 6061-T6 lightweight aluminum and hard coated to resist corrosion and abrasion.
  • All plugs furnished 12″ stainless steel chain.

Fire Hose, NBR Double Coating

  • Reinforcement: Synthetic yarn

  • Cover and Tube: Nitrile/PVC blend tube, thin-rib on cover result in better performance in abrasion-resistance

  • Color: Yellow, Orange, Red,Black

  • Package: Roll or folded, packet in carton or loaded in pallet

  • Application: Large diameter hoses for water supply and Municipal and Industrial fire fighting, Premium solution.

  • Standard: UL219, ULC, FM BS6391

  • Standard Length: 15m (50ft), 30m (100ft)

Fire Hose Rack Cabinet

  • Certificate: BS
  • Capacity: Standard fire hose rack assembly
    Or adding landing valve x 1
  • Mounting: Wall/ recessed/ semi-recessed
  • Size: Compact size/ customized
  • Door: Single or double doors (open 170°)
  • Surface: Red epoxy powder coating (steel)
    Bright finish (SS or AL)

HOSE RACK ASSEMBLY

  • Certificate: UL Listed / FM Approved
  • Standard: UL 219, NFPA 1961 / 1962
  • Feature: Occupant use, lightweight
  • Color: White, standard
  • Avail. coating: Impregnated yellow, red, etc.
  • Temperature: -40°C to 70°C
01-Hose Rack Assembly

PILLAR HYDRANT CABINET (SELF-STANDING)

  • Certificate: BS
  • Capacity: Standard fire hose + accessories
  • Mounting: Self-stand (floor mount)
  • Size: Compact size/ customized
  • Door: Single door (open 170°)
  • Surface: Red epoxy powder coating (steel)
    Bright finish (SS or AL)
03-Self-stand-fire-hydrant-cabinet

FIRE FIGHTING HOSE

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 219, BS 6391
  • Lined layer: EPDM/ PU
  • Jacket: Single (14 bar)/ double (20 bar)
  • Weave: Twill weave/ plain weave
  • Coupling: 2 x Aluminium BS336
  • Length: 15m ~ 30m/ Customized
  • Color: White/ red
04-Layflat-fire-hose

JET/ SPRAY NOZZLE

  • Certificate: BSI/ TUV/ LPCB Approved
  • Standard: BS336
  • Material: Aluminum alloy as BS1490
  • Control: Ball valve
  • Angle: Water curtain angle ≥ 180°
  • Test: 24 bar
06-Jet Spray

LANDING VALVE

  • Certificate: BSI / LPCB / FM Approved
  • Standard: BS 5041-1, BS 5154 globe type
  • Connection: Flanged to EN 1092-3, or screwed to ISO 7-1
  • Temperature: 0°C to 38°C
  • Test: Body 22.5 bar / seat 16.5 bar
  • Surface: Red powder coating (RAL 3000)
07-LANDING-VALVE

TWO WAY PILLAR HYDRANT

  • Certificate: ISO
  • Standard: BS EN 14384, EN 1074-6
  • Connection: Base flanged as EN1092-2 PN 16, ASME B16.5
  • W. pressure: 16 bar
  • Temperature: 4°C to 70°C
  • Surface: Red powder coating (RAL 3000)
08-Piller Hydrant

FIRE DEPARTMENT CONNECTION (4 WAY)

  • Certificate: BSI/ LPCB Approved
  • Standard: BS 5041-3
  • Inlet: 4 x BS336 (4 x 2.5″ BSP)
  • Outlet: Flanged as EN 1092-2, DN150 with PN16
  • Test: Factory hydro test 30 bar
  • Temperature: 0°C to 38°C
  • Surface: FBE coating as AWWA C550
09-Fire Brigade Connection

HOSE ANGLE VALVE

  • Certificate: UL Listed / FM Approved
  • Standard: ANSI / UL 668
  • Function: FDC outlet, or hose rack assembly
  • W. pressure: 300 psi
  • Surface: Rough / polished / chrome plated
10-Hose-angle-valve

MS Pipe & Fittings

ASTM A53 ERW steel pipe

  • Certificate: UL Listed/ FM Approved
  • Standard: ASTM A53, Type E, Grade B
  • Dimension: Sch10/ Sch40 as ASME B36.10M
  • Application: Fire main pipe, fire pump pipe, fire standpipe, fire sprinkler branch pipe
01-ASTM-A53-ERW-steel-pipe

Grooved 90° elbow

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Type: Short radius, R=1.0D
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized

ASTM A53 seamless steel pipe

  • Certificate: UL Listed
  • Standard: ASTM A53, Type S, Grade B
  • Dimension: Sch40/ Sch80 as ASME B36.10M
  • Application: Fire main pipe, fire pump pipe, fire standpipe, fire sprinkler branch pipe
ASTM-A53-ERW-steel-pipe

GROOVED TEE (EQUAL TEE)

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized

GROOVED REDUCING TEE

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
05-Grooved-reducing-tee

GROOVED CROSS (EQUAL CROSS)

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized

GROOVED REDUCING CROSS

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
07-Grooved-reducing-cross

MECHANICAL TEE WITH GROOVED BRANCH

  • Certificate: UL Listed / FM Approved
  • Standard: ANSI / UL 213
  • Housing: Ductile iron ASTM A536, 65-45-12
  • Bolt & nut: Carbon steel, detail as G92 ~ G96
  • Gasket: EPDM, nitrile, silicone rubber, etc.
  • Rated pressure: 300 ~ 500 psi
  • Surface: Red painting / hot dip galvanized
08-Mechanical-tee-with-grooved-branch

MECHANICAL CROSS WITH GROOVED BRANCHES

  • Certificate: UL Listed / FM Approved
  • Standard: ANSI / UL 213
  • Housing: Ductile iron ASTM A536, 65-45-12
  • Bolt & nut: Carbon steel, detail as G92 ~ G96
  • Gasket: EPDM, nitrile, silicone rubber, etc.
  • Rated pressure: 300 ~ 500 psi
  • Surface: Red painting / hot dip galvanized
09-Mechanical-cross-with-grooved-branches

GROOVED CONCENTRIC REDUCER

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
10-Grooved concentric reducer

FLEXIBLE GROOVED COUPLING

  • Certificate: UL Listed / FM Approved
  • Standard: ANSI / UL 213
  • Housing: Ductile iron ASTM A536, 65-45-12
  • Bolt & nut: Carbon steel, detail as G92 ~ G96
  • Gasket: EPDM, nitrile, silicone rubber, etc.
  • Rated pressure: 300 ~ 500 psi
  • Surface: Red painting / hot dip galvanized
11-Flexible-grooved-coupling

GROOVED END CAP

  • Certificate: UL Listed/ FM Approved
  • Standard: ANSI/ UL 213C
  • Material: Ductile iron as ASTM A536, 65-45-12
  • Temperature: -30°C to 300°C
  • W. pressure: 300PSI (2.07MPa)
  • Surface: Red paint/ hot dip galvanized
12-Grooved-end-cap